Description

The Armor AR350 is a solvent based pure acrylic sealer designed to enhance and protect concrete and concrete pavers with a low gloss wet look. Will enhance dull and faded surfaces with a low gloss wet look Will reduce damage and deterioration caused by water absorption Will reduce damage and deterioration caused by surface abrasion Easy to apply with a roller or sprayer to concrete and concrete pavers Will reduce the growth of mold, mildew, and algae UV resistant, non-yellowing, breathable Can be applied to unsealed concrete and concrete pavers, and concrete and concrete pavers previously sealed with a solvent based acrylic concrete sealer. If you are looking to seal brick or natural stone, consider the Armor WL550 instead. Coverage Rate: Porous Surfaces: Up to 175 FT2/gallon in one coat. Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat. Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance. Model Number: AR3501GAL. Age Group: adult.