Description

The Armor WL550 is a solvent based water repellent sealer that penetrates deep into concrete and masonry surfaces where it chemically reacts and fuses with the substrate to form a hydrophobic barrier within the pores. Surfaces sealed with the Armor WL550 are more resistant to the damaging effects of water absorption and salt damage. The Armor WL550 also works to slightly darken the color of the concrete or masonry, giving it a matte, wet look finish. Will enhance dull and faded surfaces with a matte wet look Works entirely below the surface and won?t leave a surface film Reduces surface water absorption Reduces damage and deterioration caused by water absorption Reduces damage and deterioration caused by snow and ice Reduces the growth of mold, mildew, and algae For use on unsealed concrete, brick, natural stone, and masonry. Coverage Rate: Porous Surfaces: Up to 175 FT2/gallon in one coat. Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat. Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Only one coat may be necessary on surfaces with a low porosity such as bluestone, flagstone, and slate. Test prior to use. Model Number: WL5501GAL. Age Group: adult.